Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Oops....help

  1. #1
    Senior Member
    Join Date
    Jun 2008
    Location
    North East England
    Posts
    13,365
    Post Thanks / Like
    Busy laminating some menus for work and I have one stuck in the laminmator!
    It's an A4 piece of paper and about 4 inches are showing on the unlaminated side....the rest is all in the laminator somewhere which is making a loud buzzing noise....nothing showing at the laminating side at all.
    It's my fault it's bust.....I've put the sheet in the wrong way and it must have buckled inside.
    How do I get it out or have I wrecked the laminator for good? :(

  2. #2
    Senior Member
    Join Date
    Jul 2008
    Location
    Highlands
    Posts
    175
    Post Thanks / Like
    oops....

    ermmm have you turned it off yes??

  3. #3
    Moderator Dawn's Avatar
    Join Date
    Jun 2008
    Location
    In the red...
    Posts
    14,370
    Post Thanks / Like
    Turn it off and let it cool down before you do anything.

    I've handled many a laminator self-inflicted emergency at the school.

  4. #4
    Senior Member
    Join Date
    Jun 2008
    Location
    North East England
    Posts
    13,365
    Post Thanks / Like
    IT'S TURNED OFF

  5. #5
    Moderator Dawn's Avatar
    Join Date
    Jun 2008
    Location
    In the red...
    Posts
    14,370
    Post Thanks / Like
    Pull very gently on the bit that's sticking out.

  6. #6
    Senior Member
    Join Date
    Jun 2008
    Location
    North East England
    Posts
    13,365
    Post Thanks / Like
    Quote Originally Posted by Dawn, post: 46066
    Pull very gently on the bit that's sticking out.
    won't budge :(

  7. #7
    Moderator Dawn's Avatar
    Join Date
    Jun 2008
    Location
    In the red...
    Posts
    14,370
    Post Thanks / Like
    Screwdriver time then.

  8. #8
    Senior Member
    Join Date
    Jun 2008
    Location
    North East England
    Posts
    13,365
    Post Thanks / Like
    Quote Originally Posted by Dawn, post: 46069
    Screwdriver time then.
    Gulp....ok, when it completely cools, I'm going in

  9. #9
    Senior Member
    Join Date
    Jul 2008
    Location
    Bastrop, Texas
    Posts
    906
    Post Thanks / Like
    You are so on your own here....I can only fix jammed printers.
    People who say money doesn't buy happiness...don't know where to shop!





  10. #10
    Senior Member
    Join Date
    Jun 2008
    Location
    North East England
    Posts
    13,365
    Post Thanks / Like
    Quote Originally Posted by BevW, post: 46102
    You are so on your own here....I can only fix jammed printers.
    It's fixed :p015: Just batted my eyelashes at DH!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •