As I posted a few days ago I have bought another small cheap telescope that now sits onto of my imaging telescope thus
I take pictures through the gold one, the job of the blue one is to focus on a star using a ccd camera and to keep that star dead centre by sending signals to the telescope mount - as you can imagine this takes a LOT of wires and a lot of very very careful calibration as we are talking about adjustments that are 1/4 of a pixel !! - anyway setting that all up took most of yesterday, and as luck would have it at about 11 o clock we had about 1.5 hours of clear skies - it took me an hour to set up but I have managed to get it working . Here is a demonstration
This is a 90second shot I took of the very feint Rosette Nebula in November - even at 90 seconds on a high ISO (very sensitive but lots of noise) you can see stars beginning to trail (not round) and no sign of any nebulosity - the red to the right is sensor noise from the camera getting hot
Usually to combat this I stack 20 or 30 pictures to help with the signal to noise ratio to at least get some picture and then try and increase the various brightness and colour channels to ease out a picture but this nebula is far too feint and all I got was this
Yuk! - If you squint some red fug in the middle
Last Night however with the setup I was able to get a rather impressive 10 minute exposure!! at ISO800 - normally at this sensitivity I would see absolutely nothing but as the exposure time is much longer you get - this straight out of the camera - the squashed stars top right are due to my lens not star trail
I think you will agree that is much better not only shape but even dust lanes in the middle of the Rosette - a little tweak in PS and it gives you
Now this is just one picture I would usually still get 20-30 at least and clean them up and remove the noise but the clouds rolled in. - So hopefully there should be some much better pics soon.